Hydro Blasting Nozzles

Every job requires the right tool to get the job done efficiently and effectively. We’re all familiar with the age-old adage. Aquachem’s adage is that industrial jobs, such as ship hull cleaning, sewer blasting, or concrete hydrodemolition, require the right high-pressure water jet nozzles (affixed to the right high-pressure water pump!).

Aquachem offers a wide range of hydro blasting nozzles for many different applications. We can help you find the right nozzle for your unique needs. Peruse our selection of water jet nozzles that are known for their exceptional craftsmanship, high durability, and trusted reliability.

ORBIMASTER 2500

The big brother of the Orbimaster line is the Orbimaster 2500. Capable of water blasting with operating pressures up to 36,300 psi, and with a maximum flow volume of 24 l/min, we’re sure you’ll have no issue handling the myriad cleaning jobs found on construction sites, shipyards or industrial operations.

The Orbimaster 2500 is exceptional when paired with high-temperature water to optimize the solubility and cleaning effectiveness of the water jet.

Operating Pressure: 36,300 psi (2,500 bar)
Flow Volume: 6 gpm (24 lpm)
Inlet Temperature: 208 F (98 C)
Rotor Diameter: 1 mm -
Weight: 2 lbs (1 kg)
Dimensions (L × D): 5 - 2 in (135 - 49 mm)
WHIRL DISC

Created for a very wide variety of surface cleaning tasks and high surface coverage areas, the Whirl Disk is capable of water blasting with two operating pressures 5,800 or 10,800 psi. The Whirl Disc generates a whirling motion of the high-pressure water. This is achieved by how the nozzle carrier head slides onto a carrier axle which, as a result of the recoil effect of the high-pressure water, rotates at several thousand revs per minute around its longitudinal axis.

Operating Pressure: 10,875 psi (750 bar)
Flow Volume: 18 gpm (70 lpm)
Number of Nozzles : 1 pc -
Weight: 2 lbs (1 kg)
Dimensions ( L x W x H ): 3 x 3 x 4 in (80 x 80 x 89 mm)
turbo nozzle TD3000-SCS

The rotating nozzle carrier head on the Turbo nozzle TD 3000 makes it a great choice for surface cleaning and pipe cleaning. This additional volume of high-pressure water gives the Turbo nozzle superb removal power for tough cleaning jobs. A great example would be the challenging environment on offshore installations. Cleaning and maintenance become much easier and economical when using the Turbo nozzle TD 3000!

Operating Pressure: 43,500 psi (3,000 bar)
Flow Volume: 12 gpm (45 lpm)
Inlet Temperature: 203 F (95 C)
Rotational Speed 1 rpm -
Number of Nozzles 1 pc -
Weight: 2 lbs (1 kg)
Dimensions (L x D) 9 - 3 in (226 - 75 mm)
ABRASIVE BLASTER 1000-9/16

Built on the injector principle, the Abrasive Blaster 1000-9/16 (also known as the Abrasivstrahlen), is the tool of choice for the toughest cleaning jobs. Successfully used for general cleaning, ship hull paint removal and cleaning and surface preparation; the mixture of abrasive compound and ultra high pressure water blasts through even the most stubborn elements.

The magic of the Abrasive blaster is the nozzle’s construction that fires high-pressure water out of three nozzles which, when combined with an abrasive, grinds away even deeply corroded surfaces.

Operating Pressure: 14,500 psi (1,000 bar)
Flow Volume: 6 gpm (21 lpm)
Inlet Temperature: 203 F (95 C)
Number of Nozzles 1 pc -
Weight: 2 lbs (1 kg)
Dimensions ( L x W x H ): 7 x 2 x 4 in (183 x 57 x 100 mm)
SPEEDY 3000

The Speedy 3000 can be connected to all Aquachem high-pressure water guns. The Speedy 3000 works by a pneumatically driven rotary transmission with a compressed air motor. The composition of HP-Gun, Speedy 3000, and nozzle carrier head makes a highly efficient water tool with a high surface cleaning rate. This makes the Speedy 3000 optimal for a wide variety of applications such as general cleaning, concrete restoration and hydrodemolition, ship hull paint removal, ship hull cleaning, screen cleaning and cleaning of formworks.

 

Operating Pressure: 43,500 psi (3,000 bar)
Flow Volume: 7 gpm (25 lpm)
Inlet Temperature: 140 F (60 C)
Rotational Speed: 1 rpm -
Weight: 7 lbs (3 kg)
Dimensions ( L x W x H ): 14 x 10 x 6 in (350 x 250 x 140 mm)
ORBIMASTER 500

Created to be optimal for a variety of industrial cleaning applications, whether it be cleaning of tanks or exposed surfaces, the removal of paints, oils, caking, corrosion, or rubber coatings – the rotary nozzle Orbimaster 500 combines the effectiveness of high pressure water blasting with the area performance of a flat jet. Applications with hot water up to 100°C can be carried out at any time. Orbimaster nozzles can be connected to the standard 9/16″ nozzle pipe of our Aquachem guns without an adapter.

Operating Pressure: 7,250 psi (500 bar)
Flow Volume: 16 gpm (61 lpm)
Inlet Temperature: 208 F (98 C)
Rotor Diameter: 1 mm -
Weight: 2 lbs (1 kg)
Dimensions (L × D): 5 - 2 in (132 - 49 mm)
ORBIMASTER 800

A step up from the Orbimaster 500, the Orbimaster 800 increases the operating pressure and flow. It handles the higher pressure while still providing the excellent cleaning ability of the Orbimaster line and high-temperature cleaning capabilities as well.

Operating Pressure: 11,600 psi (800 bar)
Flow Volume: 11 gpm (42 lpm)
Inlet Temperature: 208 F (98 C)
Rotor Diameter: 1 mm -
Weight: 2 lbs (1 kg)
Dimensions (L × D) 5 - 2 in (132 - 49 mm)
ORBIMASTER 1500

The Orbimaster 1500 is an excellent choice for tough cleaning applications like tank cleaning or corrosion removal. As is common to the Orbimaster line, the Orbimaster 1500 combines the great force of the round jet with the area performance of the flat jet. It can handle water temperatures up to 100C and is compatible with the standard 9/16” nozzle pipe of Aquachem guns. All without an adapter.

Operating Pressure: 21,750 psi (1,500 bar)
Flow Volume: 48 gpm (180 lpm)
Inlet Temperature: 208 F (98 C)
Rotor Diameter 1 mm -
Weight: 2 lbs (1 kg)
Dimensions (L × D): 5 - 2 in (135 - 49 mm)