Home WATER BLASTING Accessories Floor Cleaning

ACCESSORIES


Floor Cleaning


We have a great selection of surface cleaning Equipment available, from hand held guns to “lawnmower” type floor-cleaners to truck mounted self contained assemblies. Please contact us with your specific requirements.

WOMA- Floormaster® - FM 1000-E-24V


Floor CleaningProduct Sample:
Operating pressure: 1000 bar
Medium temperature: 100ºC

Description:
The Floormaster® is intended for the use as floor cleaning unit which, in connection with a suction device (vacuum truck), cleans and disposes simultaneously in a nonpolluting way.
The high temperature resistant (up to 100°C) makes the Floormaster® in connection with the hot-water WOMA Ecotherm® units an extremely efficient water tool.


Advantages

  • When using a optional suction device, a separate disposal of the removed contaminants is not necessary.
  • Height adjustment for spray bar.
  • Speed regulation by nozzle adjustment.



Technical data:

Part-No.: 001.1436
Operating pressure: max. 1000 bar
Medium temperature: max. + 100ºC
Weight: appr. 23 kg
Working width: ca. 300mm
Speed spray bar: max. 1500 1/min
No. of nozzles : 2
Recommended nozzles: form 4 round jet

form 19 flat jet
High pressure connection : aM24x1,5 DK
Control voltage : 24V DC
Edition: 06/01
Recommended nozzle diameters at:
800 bar and 21 l/min Part-No.
2 x 0,70mm form 4 340.0447
2 x 0,80mm form 19 30º 340.1979
500 bar and 33 l/min
2 x 1,10mm form 4 340.0428
2 x 1,00mm form 19 30º 340.1917

O-Ring for nozzle form 4 and 19 340.1917



Product Sample:

  • VACUJET VJ 2500-PN
  • For pneumatic control
  • Vacujet 2500-PN
  • with sealing lip - Part-Nr. 001.1101.3
  • Vacujet 2500-PN
    with brush - Part-Nr. 001.1102.1

Description:

The Vacujet 2500-1-PN is intended for the use as floor cleaning unit which, in connection with a suction device, cleans and disposes simultaneously in a nonpolluting way.

Depending on requirement to the ground sealing the Vacujet can be equipped with a brush or in case of highest requirements to density with a sealing lip.

Floor Cleaning

Advantages:
When using a suction device a separate disposal of suspension risen from cleaning is not necessary.
Speed adjustable by air pressure and air quantity.
Parts under pressure made of high-tensile stainless steel.
Retrofit kit for fan jet nozzle form 9 (max. 2000 bar) PN 010.7963.1.

Operating information:
The air motor is only to be used with dry, clean and lubricated air. Every 30 operating hours fill up with pneumatic oil WOMA PN 400.0252.9 - viscosity class ISO VG 32 -.


Technical data

Operating pressure:

max. 2500 bar

Overall width:

appr. 440 mm

Working width:

appr. 225 mm

Weight:

appr. 36.0 kg

Speed Spray bar:

max. 2500 rpm

Air consumption:

0.52 m³ / min at 6 bar

Air pressure:

max. 7 bar

No. of nozzles:

max. 8 pieces

Recommended nozzles:

form 13* / form 21


Operating information:
The air motor is only to be used with dry, clean and lubricated air. Every 30 operating hours fill up with pneumatic oil WOMA PN 400.0252.9 - viscosity class ISO VG 32 -.


Recommended nozzle diameters:

  • at 2000 bar and 16 l/min 8 x 0,30 mm form 21 PN 340.2133.7
  • at 2000 bar and 20 l/min 8 x 0,35 mm form 21 PN 340.2134.5
  • at 2500 bar and 15 l/min 8 x 0,25 mm form 21 PN 340.2132.9

* When using the nozzle form 13, 8 nozzle holding screws PN 160.3593.3 should be ordered separately.

Edition: 11/98



Floor CleaningProduct Sample:


  • VACUJET VJ 2500-E
    For electric control
  • Vacujet 2500-E-EXI
    with sealing lip - Part-No. 001.1103.9
  • Vacujet 2500-E-EXI
    with brush - Part-No. 001.1104.7
  • Vacujet 2500-E-24V
    with sealing lip - Part-No. 001.1145.0
  • Vacujet 2500-E-24V
    with brush - Part-No. 001.1146.8

Description:
The Vacujet 2500-1-E is intended for the use as floor cleaning unit which, in connection with a suction device, cleans and disposes simultaneously in a nonpolluting way.
Depending on requirement to the ground sealing the Vacujet can be equipped with a brush or in case of highest requirements to density with a sealing lip.


Advantages:
When using a suction device a separate disposal of suspension risen from cleaning is not necessary.
Speed adjustable by air pressure and air quantity.
Parts under pressure made of high-tensile stainless steel.
Retrofit kit for fan jet nozzle form 9 (max. 2000 bar) PN 010.7963.1. 


Technical data:


Operating pressure:

max. 2500 bar

Operating information:

  • The air motor is only to be used with dry, clean and lubricated air. Every 30 operating hours fill up with pneumatic oil WOMA PN 400.0252.9 - viscosity class ISO VG 32 -.

Recommended nozzle diameters:
  • at 2000 bar and 16 l/min 8 x 0,30 mm form 21 PN 340.2133.7
  • at 2000 bar and 20 l/min 8 x 0,35 mm form 21 PN 340.2134.5
  • at 2500 bar and 15 l/min 8 x 0,25 mm form 21 PN 340.2132.9
*) When using the nozzle form 13, 8 nozzle holding screws PN 160.3593.3 should be ordered separately.

Edition: 11/98


Overall width:

appr. 440 mm

Working width:

appr. 225 mm

Weight:

appr. 36.0 kg

Speed Spray bar:

max. 2500 rpm

Air consumption:

0.52 m³ / min at 6 bar

Air pressure:

max. 7 bar

No. of nozzles:

max. 8 pieces

Recommended nozzles:

form 13* / form 21



Banner