Home HYDRODEMOLITION Robots 710 H

ROBOTS

 

710H Classic - Horizontal Removal

AQUA CUTTER

 

Aquacutter 710H

Aquacutter 710H

 

710H Classic

 

The unit has free setting of programs, all parameters are easily selected and adjusted on the graphic colour display with iconic Multilanguage operator instructions.

Manual setting of Oscillating speed, Roller speed and speed of the Lance-angle.

One of the most important features is the patented ISC, Intelligent Sensing Control which is a advanced Sensing system, features no electronic such as sensors or cables exposed to the moisture environs.Result in a more efficient production with less stops due to problems with sensors etc.

Possibility to switch to prox. sensor control, for accessories requiring this.
High performance oscillating cutting head with easy adjustable stroke of lance oscillation.

Track control system for straight indexing, it can also be programmed to index in curves or circles. The system has a self diagnostic control system and will report system data.

Noise reduction by rubber lined splashguard on the power head, removable side covers for access in corners E.I. between horizontal and vertical surfaces.

710H Evolution

 

The unit has unlimited free setting of programs, all parameters are easily selected and adjusted on the TFT graphic colour display .

Programming for different removal depths in the same overpass.

Will do geometrical patches such as Circles, Parallelograms, squares and triangles.

Select multiply 4 overpasses each with different angles of lance attack before the robot index.

The operator can save the program settings and view production data.

Will calculate and display the removal area in square meter/H from the current settings, and verify the actual removed area.

Noise reduction by rubber lined splashguard on the power head, removable side covers for access in corners E.I. between horizontal and vertical surfaces.

High performance oscillating cutting head with easy adjustable stroke of lance oscillation.

Compensates fluctuating operational parameter caused by ambient temperature changes.

Track control system for straight indexing, it can also be programmed to index in curves or circles.

The system has a self diagnostic control system and will report system data.

Safety control system also with the possibility to switch off parts of the advanced control system (Fail-safe Mode) and continue operation with reduced features.

Manual Settings

Classic Display

Evolution Display

710H Classic

TECHNICAL DATA
 

710H Evolution

TECHNICAL DATA

 


Length min.
Length max.
Total width
Working width range
Width of track
Weight approx.
Height
Drive source

2.60 M (8.53ft)
2.85 M (9.35ft)
2.00 M (6.6ft)
0-2.14 M (0-7.2ft)
1.04-1.64 M (3.41-5.38ft)
1960 kg (4321 lb)
1.42 M (4.66ft)
(hood only 1.3M)4.26ft)
Diesel engine (possibility for
Hybrid (electric) drive-option)
Length min.
Length max.
Total width
Working width range
Width of track
Weight approx.
Height
Drive source
2.60 M (8.53ft)
2.85 M (9.35ft)
2.00 M (6.6ft)
0-2.45 M (0-8.04ft)
1.04-1.64 M (3.41-5.38ft)
1960 kg (4321 lb)
1.42 M (4.66ft)
(hood only 1.3M)4.26ft)
Diesel engine (possibility for
Hybrid (electric) drive-option)

 

Option: Kit for electric driveOur Eds

4 Metre Operation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Banner