Home WATER BLASTING Accessories Pipe And Sewer Cleaning TubeMaster® 1400-20/S


Pipe And Sewer Cleaning

TubeMaster® 1400-20/S

  • max. 1400 bar operating pressure
  • 20 metres HP-hose DN 12
  • 3 metres guiding hose DN 50
  • Hose guide

The driving unit consisting of air motor, steplessly adjustable gear, coupling and rotating lead through which produces the rotating of the high pressure hose and therefore an efficient cleaning of pipes is achieved.

The hose feeding unit serves to feed the hose into the tube to be cleaned. A torque lock serves to the turning of the pressureless hose and a strain relief device is added to increase the operational safety.

TubeMaster® 1400-20/SThe guiding hose and the hose guide are included in the assembly group PN 001.1067.6. For safety reasons only the hose type DN12-HST4G-SR2 is to be used and thus the tube cleaning can only be done by using the following components: driving unit, hose feeding unit and hose with nozzle attached.

If there is no sufficient space between driving unit and pipe to be cleaned allowing the total length of the HP- hose to be laid out straight, the hose must be laid out as shown on drawing to avoid loops.

1.    Ball valve IG 3/8
2.    Serving unit for pressurized air
TubeMaster® 1400-20/S3.    Air motor
4.    Gear
5.    Driving unit cpl., weight approx. 66,5 kg
6.    Coupling
7.    Pressure connection (iM24x1.5)
8.    Rotating leadthrough
9.    Torque lock and strain relief device
10.    Hose feeding unit, weight approx. 11,5 kg
11.    Guiding hose DN 50, weight approx. 5 kg
12.     High pressure hose DN 12, weight approx. 25,0 kg
13.    Hose guide, weight approx. 10,0 kg
14.    Nozzle connection ÜM24x1,5 24°DKO

Technical data

Part-No. :            
Operating pressure :        
Flow capicity :        
Rotating speed :        
Air consumption :        
Air pressure :            

Total weight :            
Prescribed high pressure hose    

max. 1400 bar
max. 180 l / min
16 - 144 1/min

max. 65 m³ / h

max. 6 bar

approx. 132 kg